AudioRack Instructions for Use Startup Procedure Plug in audio rack to outlet. Remove bungee cord on speakers. Setup speakers and run wires to back of mixer and speakers.   Tear Down Procedure Turn off and unplug – turn down volumes – wrap cords – use bungee – remove batteries – sanitize mics   Mixer Turn all knobs to Zero. Blue knobs have zero at top (12 o’clock). White and Red knobs – turn completely counterclockwise (7 o’clock). Turn on Power (button for mixer is in back). Turn up volume on channels in use as required to be heard and not provide feedback   Microphone receiver Volume knobs to zero. Turn on Power (front center). Batteries into Microphones. Press Power button on microphone in back near bottom. Turn up volumes on microphones in use. Sanitize microphones and remove batteries before putting them away.   Choose Mode Not needed for microphone inputs. Mode button chooses Bluetooth or LINE options for accessories to connect. “Blue” blinks until it pairs to a device. Becomes solid once paired.   Tripods Use metal pin if raising tripod from lowest setting Put Velcro between legs when fastening to rack   Speakers  Use 90-degree elbow only if needed Slide speakers into storage rack face up (prevent scraping damage to the front)