Extron - MLC 100 Plus configuration
Configuring Extron MLC100
- Configure Ethernet port of laptop to reflect IP: 192.168.254.100; Subnet: 255.255.0.0.
How to manually configure IPv4: https://support.microsoft.com/en-us/windows/change-tcp-ip-settings-bd0a07af-15f5-cd6a-363f-ca2b6f391ace
- Connect Ethernet from laptop to PoE injector Data port. Then connect PoE to Extron MLC100 ethernet port.
- Open Extron GC (Global Configure)
Go to Tools Tool Belt Drop Down (4th Choice)
Note: password is Extron if missing.
- Firmware update. Click on the micro chip icon and choose the firmware file.
- Once completed to 100%, close Toolbelt. Proceed to GCP for unit will need to be verified and build.
- File, Open Project and open Extron folder to choose latest build.
- Under Build, choose Verify and allow Verify to run.
- Once Verify, Click Build and allow Build to Complete.
Remember to click Disconnect to remove the queue for MLC.