Extron MLC100 Plus

1. Strip Cat 6 cable jacket about 1 inch and expose individual cables.
2. Cut Green and Brown pairs, Cut single Blue/White wire down to cable jacket.
3. Strip wire and connect as below.

Note: if creating a Com2 cable for Extron Box (doghouse), Flip Orange/White pin 1 with Orange pin 2 to create a bi-directional communication cable.

COM 1 wiring             COM 2 wiring

    O/W | O  | Blue   O/W| O | Blue   

RS232 Female Projector connector  Color Pin #

This is the connection in the RS232 connector used to control the projector.

Blue Pin 1 |Orange/White Pin 2 | Orange Pin  3